• Specifically
designed for direct connection with industrial circular ducting of standard
diameter.
• Incorporate
a powerful motor which is factory matched to a mixed flow impeller.
• Delivers
high airflow performance with minimum noise generation and high static pressure
typically found in ducted ventilation systems.
Quick Facts
• Suitable for ducted
ventilation system
• Size from 100 to 315 mm
• Capacities to 1800 m3/h
• Easy Installation and
maintenance
Operating Temperature
Maximum operating
temperature +40 degC
Motor
MTD Series fans are fitted
with direct connection two speed motors as standard with thermal over load
protection. All motors are suitable for speed control regulation using
electronic or auto-transformer.
Grilles
Mounted at the inlet or outlet of the fan, the grille prevents the entry
of any foreign objects.
Back-Draft Shutter
Mounted at the outlet of the MTD fan, the shutter prevents the air
recirculating when the fan is not in use.
Rectangular Duct Adapters
The adapter enables the MTD fan to be connected to rectangular ducting.
MTD models are
manufactured in tough reinforced plastic, except models 100, 250/1, 250/2 &
315 in steel casing and finished in tough epoxy-polyester paint coating.
Impeller blades
moulded in tough ABS plastic, except models 250/1, 250/2 & 315, constructed
from pressed galvanised sheet steel.
